Care & Maintenance

1. Unplug the pet feeder.
2. Make sure there is no kibble inside the tank or bowl.
3. Remove the bowl and scale from the dock.
4. Remove the lid, then remove the desiccant pack from the desiccant compartment.
5. Press the Tank Release Buttons to remove the tank from the base.

6. Flip the tank over. Turn the distributor cover counterclockwise to remove it

7. Pull the food agitator to remove, then slide the food distributor out from the center of the tank. 

8. Wash the tank, lid, food agitator, food distributor, and distributor cover with soap and water. Allow to fully dry.
9. Remove the stainless steel bowl from the scale. Wash the bowl with soap and water. Allow to fully dry.
10. Use a dry cloth to clean the scale and base.
11. Allow all parts to fully dry before reassembling.

Note:

The feeder scale and base contain electrical components and sensors. DO NOT rinse with water, soak, or use cleaning solutions that may corrode the product. DO NOT place in the dishwasher.