1. Remove all packaging.
2. Slide the Lid Release Switch to the unlocked position and remove the lid.
3. Remove the bowl, feeder scale, power adapter, and desiccant pack from the tank.
4. Remove the outer plastic packaging from the desiccant pack, then place into the desiccant compartment. Please Do not open the desiccant pack, exposing the beads. Only remove the outer plastic packaging.
5. Replace the lid. Angle the lid to insert the front side first, then press down on the back to lock it in place.
6. Open the battery compartment and insert the power adaptor firmly into the port.
7. Optionally, install 3 x 1.5V D batteries (not included). Replace the lid.
-
- Make sure the batteries are in the correct polarity.
- We recommend using both the power adapter and batteries in case of power failure. Batteries are only used as backup.
8. Press the scale firmly onto the dock until it slots into place. Make sure the scale is secure.
9. Place the bowl on the scale, then plug in the pet feeder.
-
- To avoid spilling, remove the bowl and scale before moving the pet feeder. Hold the base of the feeder (and not the tank) when you carry the pet feeder.
- Before calibrating, make sure the bowl is empty and the bowl and scale are on a level surface.
10. Press twice to calibrate the feeder scale. The Lock/Feed Indicator will light up white and blink
twice.